HOME
4 Axis System Kit -425
(1) XS-3525/8S-4 Stepper Motor Driver Board and IDC26-DB25 cable
(4) 425 oz.in. Nema 23 Mounting Double Stack/Double Shaft Bipolar Stepper Motor
Click on the link above to see if these motors are right for your project
(1) 24VDC/5.0A Power Supply with 120VAC Power Cord, and 24VDC Pigtail
(why is 5.0A enough for all of these motors?)
(1) 2.3" X 2.3" X 1" 24VDC Fan with 2-pin Molex conenctor
Drive Setup Instructions
$380.00 plus USA Shipping Flat $15.00 via USPS Priority Mail (other countries: e-mail for shipping cost)
What you will also need: Good Quality Parallel port extension cable (3 to 6 foot) 4 Conductor wire (22ga. min.) to go from stepper drive to motors A PC running G-code software such as Mach2 or TurboCNC Your CNC ready Mill/Router/etc. A ventilated case to put it all in (optional)
USA Customers, Use Paypal Processing and get
Free USPS Priority Mail Shipping (save $15.00)
$380.00
Get the whole setup: Xylotex 4 Axis Drive, 24VDC/5.0A Power Supply & Fan and the (4) 425 oz.in. Motors in one place with NO Shipping charges
Orders shipped via USPS Priority Mail, Air Mail or Global Priority Mail do NOT have tracking information.