Xylotex 3 Axis Drive Box with Motors and Cables
Xylotex 3 Axis Drive Box with 269 oz.in. Stepper Motors and
flat rate Shipping to USA Destinations.
Sorry, Out of motor stock
The drive boxes are in stock, and generally ship 1 to 2 business days after Paypal payment has been received.
Shipments will be via USPS Parcel Post to Paypal address. USA Orders Must be placed via Paypal
Other countries, e-mail firstname.lastname@example.org for shipping info.
for more information on the motors included
Drive Box with Stepper Motors and Cables (completed cables not shown in
Front of Economy Drive Box (4 axis box shown)
(3) Double Stack Double Shaft
(molex connectors not shown)
3 Axis Economy Drive box Setup & 3 steppers wired and ready to go (All Plug &
Although not shown in this photo, the new drive boxes have a second parallel port connector to
allows daisy-chaining to an external break-out board (bob). If you want to add limit
switches, etc. attach an external "bob".
Important software consideration:
The drive box requires the STEP pin on the DB25 connector to be aligned before the DIR pin, for example:
The STEP input must be an ACTIVE HIGH (+) signal. The DIR line must be stable 200nS (nanoseconds) BEFORE and
AFTER the rising edge of the STEP line. The STEP signal should be high for a minimum of 2uS (microseconds).
The drive box plays NO role in home/limit/stop switches, or spindle/coolant output. To see a possible
method of connecting switches to a drive board, look at the top of this PAGE..